Experiment Modules
1. Photo Infrared Sensor Module
- Input: 12–24V DC
- Output: NPN open collector
- Sensing range: 100 mm
- Target: Opaque and translucent materials
- Response time: –1 ms
2. Diffuse Reflective Photoelectric Sensor Module
- Input: 12–24V DC
- Output: NPN open collector
- Range: 100 mm
- Mode: Light ON / Dark ON selectable
- Target: Opaque and translucent materials
- Response time: –1 ms
3. Retro-Reflective Photoelectric Sensor Module
- Input: 12–24V DC
- Output: NPN open collector
- Range: up to 3 m
- Mode: Light ON / Dark ON selectable
- Target: Opaque material (minimum diameter 75 mm)
- Response time: –1 ms
4. Through-Beam Photoelectric Sensor Module
- Input: 12–24V DC
- Output: NPN open collector
- Range: up to 10 m
- Mode: Light ON / Dark ON selectable
- Target: Opaque material (minimum diameter 12 mm)
- Response time: –1 ms
5. Capacitive Proximity Sensor Module
- Detects metallic and non-metallic objects using electrostatic fields
- Input: 12–24V DC
- Range: 15 mm
- Output: NPN
- Frequency: 50 Hz
6. Inductive Proximity Sensor Module
- Detects metallic objects using electromagnetic field
- Input: 12–24V DC
- Range: 15 mm
- Output: NPN
- Frequency: 200 Hz
7. Ultrasonic Distance Sensor
- Range: 2 cm to 400 cm
- Voltage: 5V DC
- Current: 15 mA (typical)
- Frequency: 40 kHz
- Includes 1-meter ruler
8. Temperature and Humidity Controller Module
- Supply: 12V DC
- Temperature: -20°C to 60°C
- Humidity: 0% to 100% RH
- Accuracy: 0.1°C, 0.1% RH
- Output: Relay (up to 10A)
9. Thermocouple Temperature Sensor Module
- Sensors: Type K thermocouple and RTD
- Includes heater element with temperature control
- Supply: 24V DC
- Includes connectors for RTD and thermocouple
10. Pressure Sensor Module
- Range: 0 to 200 kPa
- Silicon strain gauge design
- Output span: ~60 mV
- Supports differential and gauge measurement
11. Pressure Gauge Module
- Mechanical pressure measurement device
- Range: 0 to 60 psi
- Includes calibration setup
12. LVDT Module
- Converts displacement into electrical signal
- Resistance: 1 k° °10%
- Speed: up to 5 m/s
- Temperature: -40°C to 150°C
- Signal: 50 kHz sine wave, 20 Vpp
- Output: 10 mV/mm
- Travel: 20 mm
13. Load Cell and A/D Converter Module
- Load capacity: 10 kg
- Output: 2.0 mV/V
- Input resistance: 405 °
- Output resistance: 350 °
- Dual input channels
- Built-in regulator, oscillator, and reset
- Supply: 2.6V to 5.5V
- Temperature: 20°C to 85°C
14. Load Cell Display Module
- Input: 12V DC
- Impedance: 100 M°
- Display: -1999 to 1999
- Output: 4–20 mA or 0–10V
- Relay output: 250V AC / 3A
15. Weight Set
Includes multiple weights:
- 200g (1), 100g (2), 50g (1), 20g (2), 10g (1)
16. Temperature Process Controller Module
- Input: 220–240V AC
- Accuracy: °5% FS
- Control: PID / ON-OFF
- Supports multiple thermocouples and RTDs
- Output: Relay and SSR
17. Heater Module
- Power: 50W
- Voltage: 240V AC
- Temperature: up to 220°C
- Heating method: Air flow radiation
-
- Level Control Module
- Operates with float sensor
- Normally closed type
- Operating voltage: 24V DC
19. Magnetic Float Sensor Module
- Reed switch type
- Used for level detection
20. Temperature Measurement Module
- Voltage: 24V DC
- Range: -50°C to 110°C
- Accuracy: 0.1°C
21. Power Supply Module
- Input: 240V AC / 50Hz
- Output: 24V DC
22. Digital Counter Module
- Supply: 24V DC
- Display: 4 digits
- Load: max 5A
- Reset via terminal contact
23. Modular Profile Panel
- 148 plug points
- Steel epoxy coated
- Dimensions: 600 ° 700 ° 100 mm
Laboratory System :
Power Supply
- Fixed: °5V, °12V (0.5A)
- Variable: 0–23V (positive and negative)
AC Supply
- Multi-tap output: 0V to °19V
Function Generator
- Waveforms: Sine, Triangle, Square
- Frequency: 1 Hz to 1 MHz
- Adjustable amplitude and offset
Additional Modules
- Data switches
- Interface adapters
Accessories :
- Test leads
- Tubing and syringe
- Power cord
- Manuals (printed and digital)
Experimental Table (Optional)
- Table size: 1500 ° 800 ° 800 mm
- Material: compressed board and steel frame
- Includes storage drawers and lockable wheels
