Fire Alarm Control System Trainer Modular Type

This system are designed in modular type where student are able to do the experiment by connecting the modules by using safety test leads set and able to activated and simulate of the whole fire protection system real time.
This control panel works on 24VDC and is operated by 240VAC 50Hz power supply. In the event of power failure, back-up supply is available from stand-by battery pack. Unit will automatically switch to battery power when AC supply is interrupted therefore integrity of the system is maintained at all time. It will automatically revert to AC power when normal power supply is restored. At the same time back-up battery pack will automatically be re-charged to the regular level.
The panels come in various ranges from 4 zones as standard. Larger zones capacities are available to user's specification. Build-in mimic diagram with LED indicator are located on the panel to show the location of the alarmed zone. It accepts a wide variety of detectors and sounding devices with line supervised output provided for zone and alarm bell circuits. Standard fire pump sets and auxiliary panel status can be monitored remotely.
This Fire Alarm Control Trainer is the scale down automatic fire detection alarm system installed in buildings. It is design to educate student the functional aspect of this fire protection system.

Experiments Cover :

• Demonstrate the process of fire alarm control panel activation
• Provides real time simulation and activation of the fire alarm control system
• Able to determine the actual course of activation from the control panel and safety procedure to be taken

Fire Alarm Control System Trainer has been specially designed for courses of building services, mechanical & electrical engineering, plant engineering, chemical engineering, marine & mining engineering etc.

Modules Included :

• 1 unit 4 zones fire alarm control panel c/w built in Battery charger
• 2 units Standby battery 12V/2.3Ah
• 1 Unit Alarm Bell
• 1 Unit Horn Strobe
• 2 Unit Smoke Detector
• 2 Units Heat Detector
• 2 units Flash Light
• 2 unit Manual Call Point (breakglass)
• 1 unit Magnetic Contact Sensor
• 1 unit PIR Motion Detector
• 1 Set Safety Test Leads Set
• 1 unit Experimental Frame 2 Layer
• 1 unit Workbench Table

Fire Alarm Control Panel :

Specification :

• Main & D/C on indication
• Main fail indication
• Battery fail indication
• Charger fail indication
• Bell line fail indication
• Zone fire, fault & isolate indication
• Evacuate switch & indication
• Buzzer isolate switch & indication
• Bell isolate switch & indication
• Fire station isolate & indication
• Auxiliary trip isolate switch & indication
• Main on / off switch
• Test lamp switch
• Test zone alarm, fault & isolate switch
• Test battery push button switch
• Master reset push button switch

Technical Data :

• 4 zones fire alarm control panel c/w built in charger
• Power supply input : 240V AC 50Hz
• Charger : Auto / Trickle
• End of line : 8K2 Ohms
• CMS output : N/O Contact
• Operating / System : 24V DC
• Charging rate : 300mA / 2.5A (Boost)
• Auxiliary output : 24V, 1 Amp

Current spec :

• Standby Mode - Master: 75mA, per zone c/w detector: 5mA

Alarm Mode :

• Master - 140mA, per trigger zone: 70mA
• Output devices (typical) : 200mA, per bell : 30mA
• 2 units Standby battery 12V/2.3Ah

Smoke Detector :

• Operating Voltage: 9 to 28 VDC Volts Non-polarized
• Standby Current: –120°A@24VDC
• Maximum Alarm Current: –15mA@24VDC
• Operating Humidity Range: –95%RH
• Operating Temperature Range: -10°C to 50°C
• Smoke Alarm Sensitivity: 1.06°.26%FT
• Fix temperature Alarm: 57°C
• Rate of rise Alarm: 7.1°C/5S
• Two LEDs provide 360° visible alarm indication

Heat Detector :

• Operating Voltage: 9 to 28 VDC Volts Non-polarized
• Standby Current: –120°A@24VDC
• Maximum Alarm Current: –15mA@24VDC
• Operating Humidity Range: –95%RH
• Operating Temperature Range: -10°C to 50°C
• Fix temperature Alarm: 57°C
• Rate of rise Alarm: 7.1°C/5S

Fire Alarm Bell :

Working Principle :

• Fire alarm internally by a 24V DC motor driven by the crankshaft connecting rod bells, no relays work, high reliability

Function :

• Fire alarm for supporting specific products and linkage fire alarm systems when fire is detected

Features :

• Motorized type
• Wide operating voltage range
• Interchangeable base
• Zero standby current
• Power supply: 24VDC

Horn Strobe :

• Temperature Range: -10~+50°C
• Humidity Range: –95% RH
• Operating Voltage: DC12-DC24
• Working Current: –60 mA
• Flash Intensity: –1.2 WS
• Flash Period: –1.0 S
• Alarm Sound: –100 dB
• Flash Light lifespan: –40000

Sound Types :

• Ambulance Sound
• Police Car Sound
• Fire Truck Sound

Manual Call Point :

Type I :

• Main Voltage Zone 24V or 12V
• Monitoring current –20°A
• Alarm current –15mA
• Protection class IP30

Work condition :

• Normal: Green light blink
• Alarm: Red light, green off

Type II :

• Operating Voltage Range: 9-28VDC
• Alarm Current: 45 mA
• Operating Humidity Range: 10% to 93% RH
• Operating Temperature Range: -10°C to 50°C

Operation :

• Push in and pull down handle activates alarm switch

Flash Light :

• Fire flashing lights used for alarm warning
• 24V DC LED flashing alarm signal

PIR Motion Detector :

• Induction distance: –5 ~ 8 M
• Induction angle: 120°
• Working temperature: -20~60°
• Input: 12-24V
• Output current: 8A
• Static power consumption: <1W
• Output power: 12V –96W, 24V –192W

Magnetic Contact Sensor :

• Construction: Rhodium Over Gold Reeds
• Max Contact Rating: 28VDC, 0.5A, 10W
• Gap Distance: 3/4" ~ 1"
• Designed for alarm systems

Test Lead Set :

• Stackable test lead set with 2 bridging plug sets
• 5 different coded colors
• Stackable Terminal Socket & Plug (4mm)
• 19mm Bridging Plug Set

Experimental Frame :

• Din Standard A4 With Two Shelves
• Side Frame: T Shape

Dimension :

• Length: 1450mm
• Width: 20mm
• Height: 300mm

Workbench Table :

• Length: 1500mm
• Width: 800mm
• Height: 800mm
• Lower Cabinet with 3 Storage Drawers
• Castor Wheels (Front With Lock)

Student Courseware :

Instruction Manual consist of circuit/wiring diagram, devices information, experiments and operation of the system in hardcopy & softcopy CD Format

• Modular Type Design Plug & Play format
• Simple layout with easy to operate features
• Simple operation
• Self contained - required only electrical supply (240VAC, 50Hz)
• User friendly and easy to operate
• Used standard devices and components readily available
• Built-in standby batteries in case of power supply failure
• Easy to maintain and service