Jaw Crusher, Output: 500 kg / hr

The Jaw Crusher, Output: 500 kg / hr is specifically designed for accepting large feed sizes up to 110 mm. The gap width can be set stepless from 0–11 mm. Depending on the sample material, particle sizes down to 0.5 mm can be obtained in one working run, resulting in an excellent crushing ratio of 220.

Process-line Version :

• The JAW CRUSHER, OUTPUT: 500 KG / HR jaw crusher is also available in versions which are suitable for continuous size reduction in online operation, e.g. for quality control during the production process.
  These are supplied without feed hopper and motor protection switch. The voltage of the three-phase AC motor will be selected in accordance with the customer's requirements.

Typical Sample Materials :

• Jaw crushers are ideally suited for preliminary crushing of construction materials, ores, granite, oxide ceramics, quartz, slag, silicon, coal, tungsten alloys, cement clinker, etc.
  To find the best solution for your sample preparation task, visit our application database.

Functional Principle :

• The Jaw Crusher, Output: 500 kg / hr is a robust and powerful forced-feed crusher. The feed material passes through the no-rebound hopper and enters the crushing chamber.

• Size reduction takes place in the wedge-shaped area between the fixed crushing arm and one oscillating with high frequency. This motion ensures a consistent gap width in the stroke cycle so that the sample is crushed to the set fineness in one working step. Two massive flywheels transmit high impulse forces to the crushing jaws. The innovative design permits using both sides of the jaws thanks to a 180° rotation.

Field of application :

• chemistry / plastics, construction materials, engineering / electronics, environment / recycling, geology / metallurgy, glass / ceramics

Feed material :

• medium-hard, hard, brittle, tough

Size reduction principle :

• pressure

Material feed size :

• < 110 mm

Final fineness :

• 90% < 0.5 mm

Throughput :

• 500 kg/h

Material of grinding tools :

• manganese steel, NiHard 4

Jaw width :

• 250 x 130 mm

Gap width setting :

• 0 - 11 mm

Gap width display :

• Scale

Hinged hopper :

• yes

Dust extraction unit :

• yes

Central lubrication :

• no

Process line version :

• Optional

Collector capacity :

• 15 l

Drive 3-phase :

• motor

Drive power :

• 7.5 kW

Electrical supply data :

• different voltages

Power connection :

• 3-phase

Protection code :

• IP 55

W x H x D closed :

• 930 x 1400 x 1080 mm

Net weight :

• ~ 1000 kg

Standards :

• CE