Jaw Crusher, Output: 600 kg / hr

The Jaw Crusher, Output: 600 kg / hr is specifically designed for accepting large feed sizes up to 130 mm. The gap width can be set stepless from 1–40 mm. Depending on the sample material, particle sizes down to 5 mm can be obtained, resulting in a crushing ratio of 26. A throughput of up to 600 kg/h is possible with the JAW CRUSHER, OUTPUT: 600 KG / HR.

Superiority in Detail

Robust design, simple handling and cleaning are the features of the JAW CRUSHER, OUTPUT: 600 KG / HR . For sample amounts of up to 35 L the JAW CRUSHER, OUTPUT: 600 KG / HR can be used batch-wise; for larger amounts it can be operated continuously.

The crushed sample is collected in a removable collector. For larger amounts or continuous crushing operations, the sample collector can be replaced by customer-specific solutions (e.g. a belt conveyor).

Wear Compensation by Zero-Point Adjustment

Depending on the material and the throughput, sooner or later the breaking jaws will start to show signs of wear. This means that the set breaking jaw distance or the crushing gap will increase with time. To still be able to obtain reproducible crushing results this wear must be compensated.

Jaw crushers can be continuously adjusted, allowing for compensation of breaking jaw wear. This is done by slowly altering the gap width setting with the motor running until the breaking jaws are heard to come into contact. The new zero point thus obtained is saved by readjusting the scale.

User Convenience Combined with Maximum Safety

Safety is a top priority with jaw crushers. The feed hopper with splash-back protection cannot be accessed by hand. A safety switch and the brake motor ensure an immediate stop if the unit is opened or switched on incorrectly.
For easy cleaning of the crushing chamber, the hinged hopper can be removed in a few simple steps. The jaw crushers run very smoothly and quietly and are virtually maintenance-free.

Accessories for the Jaw Crusher

Breaking jaws and wearing plates are available in five different materials to be selected depending on the sample and the analysis to be carried out:

• Manganese steel
• Stainless steel
• Tungsten carbide
• Steel for heavy-metal free grinding

Jaw Crusher for Special Requirements

Apart from the standard model, the Jaw Crusher, Output: 600 kg / hr is also available in special versions adapted to particular application requirements.

Heavy-metal free crushing

All jaw crushers are available in a heavy-metal-free version. The JAW CRUSHER, OUTPUT: 600 KG / HR can also be supplied in a special version suitable for crushing semiconductor materials. This includes plastic lining of feed hopper and receptacle as well as breaking jaws and wear plates of tungsten carbide.

Thus, the sample does not come into contact with metal materials at any point and no abrasion of the grinding tools impairs the purity of the sample material.

Process-line Version

The JAW CRUSHER, OUTPUT: 600 KG / HR is also available in versions which are suitable for continuous size reduction in online operation, e.g. for quality control during the production process.

These are supplied without feed hopper and motor protection switch. The voltage of the three-phase AC motor will be selected in accordance with the customer's requirements.

Functional Principle

The Jaw Crusher JAW CRUSHER, OUTPUT: 600 KG / HR is a robust and powerful forced-feed crusher. The feed material passes through the no-rebound hopper and enters the crushing chamber.

Size reduction takes place in the wedge-shaped area between the fixed crushing arm and one moved by an eccentric drive shaft. The elliptical motion crushes the sample which then falls under gravity.

As soon as the sample is smaller than the discharge gap width, it falls into a removable collector. The jaw crusher features continuous gap width setting with scale which ensures optimum size reduction in accordance with the set gap width.

Applications :

• coarse and pre-crushing

Field of application :

• chemistry / plastics, construction materials, engineering / electronics, environment / recycling, geology / metallurgy, glass / ceramics

Feed material :

• medium-hard, hard, brittle, tough

Size reduction principle :

• pressure

Material feed size :

• < 130 mm

Final fineness :

• < 5 mm

Throughput :

• 600kg/h

Material of grinding tools :

• manganese steel, stainless steel, tungsten carbide, steel 1.1750 (for heavy-metal free grinding)

Jaw width :

• 138 x 198 mm

Gap width setting :

• 1 - 40 mm

Gap width display :

• Scale

Zero point adjustment :

• yes

Hinged hopper :

• yes

Dust extraction unit :

• yes

Process line version :

• Optional

Collector capacity :

• 27.5 l / 35.4 l

Drive :

• 3-phase motor

Drive power :

• 3.0 kW

Electrical supply data :

• different voltages

Power connection :

• 3-phase

Protection code :

• IP 54

W x H x D closed :

• 670 x 1450 x 1600 mm

Net weight :

• ~ 700 kg

Standards :

• CE

• Robust & Versatile
• Excellent crushing performance
• Wide range of materials for contamination free grinding
• Wear compensation with zero-point adjustment
• Continuous gap width setting
• Easy-to-clean crushing chamber
• Suitable for continuous grinding
• Connector for dust extraction