The Oil Lubricated Journal Bearing Rotor Dynamics Simulator is an innovative training system designed to study the dynamic behavior of rotors supported by oil-lubricated journal bearings, along with other common machinery faults such as unbalance and resonance. An integrated oil pump is provided to circulate the lubrication fluid. The system offers different bearing clearance selections and controllable lubrication oil pressure to demonstrate rotor dynamics phenomena such as oil whirl and oil whip.
Manufactured by Atico Export with a focus on precision, durability and consistent performance in mechanical engineering applications.
Experiment possibilities :
- The simulator fitted with a resonance kit provides practical experience in rotating machinery resonance and helps users learn resonance mitigation methods.
- Different numbers of rotor disks can be installed at various locations on the main shaft to excite resonances up to the third mode.
- The Bode plot of the main shaft vibration during a coast-down test helps identify different resonance frequencies.
- Oil whirl and oil whip are important instability phenomena associated with rotors supported by fluid film bearings.
- By selecting different bearing loads through the number of rotor disks, bearing clearances through bearing cartridges and oil pressure through the oil supply valve, oil whirl and oil whip can be simulated.
- The waterfall plot demonstrates the first critical speed of the main shaft (1X), oil whirl and oil whip.
- To observe oil whirl and oil whip, the simulator must operate at more than twice the first critical speed of the main rotor shaft.
- Demonstrates the phase relationship between heavy spots and high spots using the simulator and optional accessories.
Electrical :
Motor :
- 3 Phase, 1/2 HP motor, pre-wired self-aligning mounting system for easy installation and removal.
Drive :
- 1/2 HP variable frequency AC drive with multi-featured front panel programmable controller.
Rpm range :
- 0 to 6000 rpm (short duration), variable speed.
Tachometer :
- Built-in tachometer with LCD display and one pulse per revolution analog TTL output for DAQ purposes.
Voltage :
- 115/230 VAC, Single phase, 60/50 Hz.
Mechanical :
Shaft diameter :
- 1/2? diameter, turned, ground and polished (TGP) steel.
Rotor base :
- 30? long, completely movable using jack bolts for easy horizontal misalignment and standard shims for vertical misalignment.
- Pinned for easy realignment.
Bearing :
- Two full fluid film bearings with multiple oil inlet ports and provisions to mount proximity probes at any angle.
- Bearing mounts can be mounted in nine different positions for variable rotor span.
Oil distribution system :
- Pump, pressure gauge, stainless steel oil tank, backflow safety switch and pressure interlock gauge.
Rotors :
- Two 6? aluminum rotors with 36 threaded holes at 10-degree intervals for introducing unbalance.
Safety cover :
- Lockable, clear, impact-resistant hinged plastic cover with motor interlock switch to shut down the motor when the cover is raised.
Foundation :
- 1/2? die-cast aluminum base, base stiffener and eight rubber isolators.
Physical specifications :
Weight :
Dimensions :
- Length: 50? (125 cm).
- Width: 14? (36 cm).
- Height: 23? (58 cm).