The Basic Machinery Fault Simulator is designed to provide an in-depth understanding of different vibration signatures through controlled experiments on a machine that emulates real-world machinery. It enables users to study the interaction between dynamic stiffness, resonance and speed to understand real-world vibration spectra. The system helps develop practical skills in diagnosing industrial machinery problems through controlled experiments. It also enables offline training and experimentation, minimizing production downtime and operational interruptions.
Manufactured by Atico Export under expert engineering guidance for reliable mechanical engineering laboratory performance and practical machinery diagnostics training.
Electrical :
Motor :
- 3 Phase, 1/2 HP motor, pre-wired self-aligning mounting system for easy installation and removal.
Drive :
- 1/2 HP variable frequency AC drive with multi-featured front panel programmable controller.
Rpm range :
- 0 to 6000 rpm (short duration), variable speed.
Tachometer :
- Built-in tachometer with LCD display and one pulse per revolution analog TTL output for DAQ purposes.
Voltage :
- 115/230 VAC, Single phase, 60/50 Hz.
Mechanical :
Shaft diameter :
- 5/8? diameter, turned, ground and polished (TGP) steel.
Bearing :
- Two sealed rolling element bearings in aluminum horizontally split bracket housing for easy changes, tapped for transducer mounting.
- Bearing mounts can be mounted in five different positions for variable rotor span.
Rotor base :
- 15? long, completely movable using jack bolts for easy horizontal misalignment and standard shims for vertical misalignment.
- Pinned for easy realignment.
Rotors :
- Two 6? aluminum rotors with 36 threaded holes at 10-degree intervals for introducing unbalance.
Safety cover :
- Lockable, clear, impact-resistant hinged plastic cover with motor interlock switch to shut down the motor when the cover is raised.
Foundation :
- 1/2? (12.7 mm) die-cast aluminum base, base stiffener and six rubber isolators.
Physical specifications :
Weight :
- Approximately 100 lb (45 kg).
Dimensions :
- Length: 32? (80 cm).
- Width: 14? (36 cm).
- Height: 22? (55 cm).
System includes :
- 1/2 HP variable frequency AC drive with multi-featured front panel programmable controller.
- 3 Phase, 1/2 HP motor, pre-wired self-aligning mounting system for easy installation and removal.
- Built-in tachometer with LCD display and one pulse per revolution analog TTL output for DAQ purposes.
- Split bracket bearing housings with features for span reconfiguration.
- Two rolling element ball bearings with squeeze-lock type.
- Vibration isolator mounts and base stiffener.
- Two balance rotors with two rows of holes.
- Alignment system with calibrated reference dials and jack bolts.
- One 5/8? TGP straight steel shaft.
- Impact-resistant clear safety cover with safety interlock.
- Balance weight kit.
- Allen wrench set.
- 24V power supply.
- Cover support.
- Comprehensive operations manual.