Wireless Smart Gate for School, Colleges and Universities Purpose.

Wireless Smart Gate

The Wireless Smart Gate is a multi-purpose photogate designed to accurately measure speed and velocity using dual photogate beams spaced 1.5 cm apart. Its built-in laser switch allows timing of objects that are too large to fit through the photogate arms when used with an external laser. The integrated slot on the arm accommodates photogate tape, enabling the measurement of larger and faster-moving objects, such as model rockets. An auxiliary port allows connection of an additional photogate head or Time-of-Flight accessory.

Designed and manufactured by Atico Export to meet the practical requirements of modern physics laboratories and educational training facilities.

What's Included :

• 1 × Smart Gate
• 1 × Mounting Rod

Gate Separation : 1.5 cm

Timing Resolution : 3 µs

Minimum Block Time : 1.5 ms

Beam Wavelength : 940 nm

Gate Inside Width : 7.2 cm

Dimensions (L × W × H) : 10.5 × 7.0 × 3.0 cm

Approximate Mass : 90 g

Connectivity : USB and Bluetooth 5.2

Logging : Not Supported

Battery Type : Rechargeable LiPo

Battery & Data Logging :

Stored Data Points Memory : Not Supported

Battery Life – Connected (Data Collection Mode) : More than 16 hours (more than 8 hours with auxiliary port)

Battery Life – Logging (Data Logging Mode) : Not Supported

Battery Type : Rechargeable LiPo

• Dual photogate beams for accurate speed and velocity measurement.
• Gate separation of 1.5 cm.
• Built-in laser switch for timing larger objects.
• Integrated slot for photogate tape.
• Suitable for measuring larger and faster-moving objects, including model rockets.
• Auxiliary port for connecting an additional photogate head or Time-of-Flight accessory.
• USB and Bluetooth 5.2 connectivity.
• Rechargeable lithium-polymer battery.
• Data logging is not supported.
• Synchronization between two Wireless Smart Gates is limited to 2 ms. Using two gates in the same experiment is not recommended unless measured times exceed 0.5 seconds.