Analog & Digital Lab Trainer :
- DC Power Supplies Module
- Fixed Output: +5V/0.5A, -5V/0.5A, +12V/0.5A, -12V/0.5A
- Variable Output: +0V ~ +23V/0.5A, -0V ~ -23V/0.5A
AC Power Supplies Module :
- 19V–15V–9V–0V–9V–15V–19V
Function Generator Module :
- Sine, Triangle and Square waveform output
- Frequency range: 1Hz to 1MHz in 6 decades
- With fine adjust, Amplitude and DC offset control
- TTL Mode: 1Hz to 1MHz in 6 decades
Six frequency ranges :
- 1Hz to 10Hz
- 10Hz to 100Hz
- 100Hz to 1KHz
Removable Solderless Breadboard Module :
- Interconnected nickel plated with a total of 2200 tie points, fitted for all DIP sizes and components with lead and solid wire diameter (0.3-0.8mm)
Two Logic Output Switches Module :
- Provide two sets of logical output X / X° & Y / Y°
Two Pulse Switches Module :
- Provide two sets of pulse output A / ° & B / B°
- 2 units push button switch with debouncer
16-Bits LED Indicators Module :
- Sixteen LED–s separate input terminals in three colors (Red, Yellow & Green)
16-Bits HI/LO Data Output Switches Module :
- 16 units slide switches with corresponding output terminals
TTL/CMOS Selection Switch :
- Select TTL or CMOS Mode for data switches
Speaker Module
- 8Ohm, 0.25W with Audio Amplifier
Potentiometer Module
- With 1K, 10K and 500K Ohm Potentiometers
Adaptors Module
- 2 Channels 4mm Binding Post to Turn Pin Adaptor
- 2 Channels BNC To Turn Pin Adaptor
Universal Lab Modules :
Dot Matrix Display Module
LCD Display Module
- LCD panel (2 x 16 characters)
Frequency Counter Module
- Counter range: 1Hz – 50MHz auto-ranging (Maximum 50MHz)
- Accuracy: 5% for input frequency less than 1kHz
- 2% for input frequency greater than 1kHz
- 8 digits 7-segment LED display
Programmable Capacitors Module
- 1nF to 40nF (8 Programmable Decade)
- 0.1°F to 4°F (8 Programmable Decade)
Programmable Resistors Module
- 10° to 400° (8 Programmable Decade)
- 1K° to 40K° (8 Programmable Decade)
Programmable Inductors Module
- 1°H to 40°H (8 Programmable Decade)
- 100°H to 4mH (8 Programmable Decade)
Computer Interface Module
- RS-232 Serial Interface
- Centronics / Parallel Interface
USB Interface
Potentiometer Module
- With 1K, 10K, 100K and 1M Ohm Potentiometers
Switches
- 2 Positions Slide Switch
- 3 Positions Slide Switch
Adaptors Module
- 5 Channels 4mm Binding Post to Turn Pin Adaptor
- 10 Channels 2mm Test Pin to Turn Pin Adaptor
External Modules :
- Analog Multimeter
- DC Voltage (range): 0.1V/0.5V/2.5V/10V/50V/250V/1000V
- AC Voltage (range): 10V/50V/250V/1000V
- DC mA Current (range): 50°A/2.5mA/25mA/0.25A
- Resistance (range): 20°/200°/2K°/20K°/200K°
- Low Frequency DB Test: ACV 10V/50V/250V/1000V
- Leakage Current: 150°A/1.5mA/15mA/150mA
- hFE Tester: 0~1000
- 3 ° Digit Digital LCD Display Multimeter
- DC Voltage (range): 200mV/2000V/20V/200V/1000V
- DC Current (range): 200°A/2000°A/20mA/200mA/10A
- AC Voltage (range): 200V/750V rms
- Resistance (range): 200°/2000°/20K°/200K°/2000K°
- Audible Continuity Test
Diode Test
- Transistor Tester: hFE NPN & PNP
Test Lead Set
- 2mm Stackable Test Leads Sets
- 10 units - 5 color coded (Red, Yellow, Blue, Black & Green)
Additional Details :
- Softcopy user–s manual and power cord included
Power Supply:
- AC240V, 50Hz (Fuse Protected)
