ATENG 11998 — Deep Bed Filter Unit
Anodized aluminum frame and panels made of painted steel.
The unit includes wheels to facilitate its mobility.
Main metallic elements made of stainless steel.
Diagram in the front panel with distribution of the elements similar to the real one.
- Filter column, where the porous media is formed:
- It includes the following elements:
- Transparent PMMA tube of circular section (column height: 1300 mm), with removable top and
bottom covers.
Support filter of the porous bed.
Filtering bed.
Thirty pressure takings.
Thirty sample capturing takings.
ATENG 11998 detail
- Tank:
- Its objective is to prepare the suspension for being filtered. There is a tank with two reservoirs:
Reservoir 1 = 350 l.
Reservoir 2 = 350 l.
- Total capacity: 700 l.
Both reservoirs have water heigh level.
- Pump:
Centrifugal pump.
In order to take the fluid to the upper part of the filter column (filtering operations), or the bottom part of the column (washing operation
of the porous bed).
Pipes and valves system to establish several circuits and regulate the flows.
- Flowmeter, rotameter type, range: 50 – 600 l/h.
- Manometric board:
The filtering column has static pressure takings to which the piezometric tubes are coupled.
- Number of piezometric tubes: 30.
- Column height: 1300 mm.
Air purger for eliminating bubbles which are initially in the circuit.
Cables and Accessories, for normal operation.
