Heating Control Application

The Heating Control Application, to study how a heating control apllication works.

ATENG 11041 — Heating Control Application

• The application “ATENG 11041” includes the following elements:
• N-ALI02. Domestic Main Power Supply Module.
• Supply voltage (single-phase): 230 VAC, 1PH + N.
  ON / OFF removable key.
• Output voltage connections:
• Two single-phase: 230 VAC.
  Single-phase supply hose connecting plug. N-ALI02
• Differential magnetothermal 2 poles, 25 A, 30 mA AC 6 KA.
  Emergency stop push button.
• N-TIM01. Bell 70 dB Module (2 units).
• Nominal voltage: 230 VAC.
• Frequency: 50 Hz.
• Sound pressure level: 70 dB. N-TIM01
• N-SEL09. Double Luminous Signalling red/green 230 VAC Module (2 units).
• Nominal voltage: 230 VAC.
  Red and green luminous warning.
• Power of luminous warning: 5 W.
• Terminals:
  Two single-phase terminals (PH + N) to connect the electrical warning. N-SEL09
• N-MED76. Thermostat for Heating Module.
• Supply voltage: 230 VAC (PH + N).
• Nominal current: 10 A.
• Wheel to change the temperature:
• Regulation: 5 °C – 30 °C.
• Accuracy: 0.25 °C.
  N-MED76
• Contacts:
  One normally close contact (NC).
• N-MED77. Thermostat for Heating and Refrigeration Module.
• Supply voltage: 230 VAC (PH + N).
• Nominal current: 10 A.
• Wheel to change the temperature:
• Regulation: 5 °C – 30 °C.
• Accuracy: 0.25 °C. N-MED77
• Contacts:
  One normally open contact (NO).
  One normally close contact (NC).
  Common point of normally close/open contacts.
• All necessary cables to realize the practical exercises are included.
  Cables and accessories, for normal operation.