Computer Controlled Process Control (Pneumatic Valve) Deluxe

The Computer Controlled Process Control (Pneumatic Valve), allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH, conductivity and ATENG 12353) in several ways.

ATENG 12662 — Computer Controlled Process Control (Pneumatic Valve)

(for main items)

• With this unit there are several options and possibilities:
• Main items: 1, 2, 3, 4 and 5.
• Optional items: 6, 7, 8, 9 and 10.
• Let us describe first the main items (1 to 5):
• 1 UCPCN-UB. Base Unit for ATENG 12662:
  Bench-top unit.
  Anodized aluminum frame and panels made of painted steel.
  Main metallic elements made of stainless steel.
  Diagram in the front panel with distribution of the elements
  similar to the real one.
  This unit is common for the required elements (at least one) (Not
  included).
  Transparent main tank and collector with an orifice in the central
  dividing wall (2 x 25 l), and drainage in both compartments.
  Transparent dual process tank (2 x 10 l), interconnected through
  an orifice and a ball valve and an overflow in the dividing wall;
  a graduate scale and a threaded drain of adjustable level with
  bypass.
• Two centrifugal pumps, range: 0 – 10 l/min.
  Two variable area flow meters (0.2 – 2 l/min, and 0.2 – 10 l/min),
  and with a manual valve.
  Line of on/off regulation valves (solenoid). Usually one is
  normally opened, and the other two are normally closed, and
  manual drainage valves of the upper tank.
• Pneumatic control valve:
  Pneumatic valve with positioner regulator.
• Body in stainless steel connection G 1/2”, orifice 6 mm.
  The I/P converter transforms the electric signal sent from the
  computer into a proportional pressure that acts over the valve.
• Helix stirrer, max. speed: 330 rpm.
• Each required element will be supplied and installed in the Base Unit: ATENG 12662
  Unit for ATENG 12662, “UCPCN-UB”, and ready for working.
• The complete unit includes as well:
  Advanced Real-Time SCADA and PID Control.
  Open Control + Multicontrol + Real-Time Control.
  Specialized Control Software based on LabVIEW.
  National Instruments Data Acquisition board (250 KS/s, kilo samples per second).
  Calibration exercises, which are included, teach the user how to calibrate a sensor and the
  importance of checking the accuracy of the sensors before taking measurements.
  Projector and/or electronic whiteboard compatibility allows the unit to be explained and
  demonstrated to an entire class at one time.
  Capable of doing applied research, real industrial simulation, training courses, etc.
  Remote operation and control by the user, as well as remote support from technical
  support, are always included.
  Totally safe, utilizing 4 safety systems (Mechanical, Electrical, Electronic & Software).
  Designed and manufactured under several quality standards.
  Optional ICAI software to create, edit and carry out practical exercises, tests, exams,
  calculations, etc. Apart from monitoring user's knowledge and progress reached.
  This unit has been designed for future expansion and integration. A common expansion is
  the Scada-Net (ESN) System which enables multiple students to simultaneously
  operate many units in a network.
• Required elements (at least one) (Not included):
• UCPCN-T. Set for Temperature Process Control for ATENG 12662.
• UCPCN-C. Set para Control de Procesos de Caudal para ATENG 12662.
• UCPCN-N. Set for Level Process Control for ATENG 12662.
• UCPCN-PA. Set for Water Pressure Process Control for ATENG 12662.
• UCPCN-PH. Set for pH Process Control for ATENG 12662.
• UCPCN-CT. Set for Conductivity and ATENG 12353 (Total dissolved Solids) for ATENG 12662.
  4

Complete Technical Specifications (for main items)

• UCPCN/CIB. Control Interface Box:
  The Control Interface Box is part of the SCADA system.
  Control interface box with process diagram in the front panel and with the same distribution that
  the different elements located in the unit, for an easy understanding by the student.
• All sensors, with their respective signals, are properly manipulated from -10V. to +10V. computer output.
  Sensors connectors in the interface have different pines numbers (from 2 to 16), to avoid
  connection errors.
  Single cable between the control interface box and computer.
  The unit control elements are permanently computer controlled, without necessity of
  changes or connections during the whole process test procedure.
  Simultaneous visualization in the computer of all parameters involved in the process.
  Calibration of all sensors involved in the process.
  Real time curves representation about system responses.
  Storage of all the process data and results in a file.
  Graphic representation, in real time, of all the process/system responses.
  All the actuators’ values can be changed at any time from the keyboard allowing the
  analysis about curves and responses of the whole process.
  All the actuators and sensors values and their responses are displayed on only one screen in the
  computer.
  Shield and filtered signals to avoid external interferences.
  Real time PID control with flexibility of modifications from the computer keyboard of
  the PID parameters, at any moment during the process. UCPCN/CIB
  Real time PID and on/off control for pumps, compressors, heating elements, control valves, etc.
  Real time PID control for parameters involved in the process simultaneously.
  Proportional control, integral control and derivative control, based on the real PID mathematical
  formula, by changing the values, at any time, of the three control constants (proportional, integral
  and derivative constants).
  Open control allowing modifications, at any moment and in real time, of parameters involved in the
  process simultaneously.
  Possibility of automatization of the actuators involved in the process.
  Three safety levels, one mechanical in the unit, another electronic in the control interface and
  the third one in the control software.
• 3 DAB. Data Acquisition Board:
  The Data Acquisition board is part of the SCADA system.
  PCI Express Data acquisition board (National Instruments) to be placed in a computer slot. Bus
  PCI Express.
• Analog input:
  Number of channels= 16 single-ended or 8 differential. Resolution=16 bits, 1 in 65536.
• Sampling rate up to: 250 KS/s (kilo samples per second).
• Input range (V)=±10 V. Data transfers=DMA, interrupts, programmed I/0. DMA channels=6.
• Analog output:
  Number of channels=2. Resolution=16 bits, 1 in 65536.
• Maximum output rate up to: 900 KS/s.
• Output range (V)=±10 V. Data transfers=DMA, interrupts, programmed I/0. DAB
• Digital Input/Output:
• Number of channels=24 inputs/outputs. D0 or DI Sample Clock frequency: 0 to 100 MHz.
• Timing: Number of Counter/timers=4. Resolution: Counter/timers: 32 bits.
  The Data Acquisition board model may change at any moment, providing the same or better
  features than those required for the unit.
  4 Cables and Accessories, for normal operation.
• 5Manuals:
• This unit is supplied with 8 manuals: Required services, Assembly and Installation, Interface and
  Control Software, Starting-up, Safety, Maintenance, Calibration & Practices manuals.
• References 1 to 5 are the main items: ATENG 12662 + UCPCN/CIB + DAB + Cables and Accessories + Manuals are included in the minimum
  supply for enabling normal and full operation.
  5