Industrial Controllers Networking Deluxe

The Unit enables to take the first steps in process automation using field buses, and provide the students the material for analyze a full operative industrial controllers network. It demonstrates the operation of a process control system based on a simple application.

ATENG 12652 — Industrial Controllers Networking

• “ATENG 12652” is composed of:
• Unit (in metallic box), including:
• 2 Industrial Controllers modules. Each module is composed of:
• Industrial Controller:
  ABB Controller CM30.
• Display: color 1/4 VGA TFT, liquid crystal display (LCD) with built-in backlight.
• Language: English, German, French, Italian and Spanish.
• Operator keypad: 6 tactile membrane keys.
• Password protection: Basic/Advanced user-assigned password protection.
• Trend display:
  Recording of 2 variables.
  Configurable sample rate (1 second to 5 minutes).
• Control parameters:
• Proportional band: 0 to 999.9 %.
• Integral: 0 to 10000 s.
• Derivative: 0 to 999.9 s.
  Manual Reset 0.0 to 100 %.
• Autotune: On-demand calculation of control settings.
• Process alarms:
• Number: 8.
• Types: High/Low process and High / Low latch.
• Acknowledgement: Via front panel keys or digital signals.
• Source: Fully configurable (for example, PV, analog input, math block inbuilt, OP control loop deviation).
• Hysteresis: Level and time.
• Alarm enable: Enable/Disable of individual alarms via a digital signal.
• Analog inputs:
• Number: 2.
• Complete configurable process input: voltage (V or mV), current (mA), resistance (ohms), Thermocouple, 3-Wire RTD, frequency,
• pulse, volt-free digital input and 24V digital input.
  Selectable set points via software (remote from the computer) or front panel.
• Analog/Digital output:
• Number: 1.
• Type: configurable as analog or digital pulse.
• Analog range: 0 to 20 mA (programmable).
• Control output types (Configurable through software):
  Current proportioning/Voltage proportioning (using resistor).
  Time proportioning.
  On/Off.
  Motorized valve with feedback.
  Motorized valve without feedback.
  Split output with combinations of relay digital O/P and current O/Ps.
• Relays:
• Number: 2.
• Type: N/O.
• Contact rating: 5A, 240V.
• Communication (PC): RS-485 connector (Profibus DP).
• Set Point Generator module:
• 2 Voltages selectable through a switch, which allows generate a step signal.
• Amplitude: 0 to 10V DC.
  All process variables are accessible as analog signals at lab jacks.
• Possibility of connection of external instruments via lab jacks (for example: line recorder, oscilloscope, etc).
  Interface card, with RS-485 connector, to connect the industrial controllers through a field bus (Profibus DP) with the computer (PC).
• Software: it includes the OPC server drivers and the Control Configuration Software for the Industrial Controllers.
  Cables and accessories, for normal operation.