HSE Multi Sensor Amplifier Physiology Lab Equipments

The Multi Sensor Amplifier is designed for measurement applications in animal experimental research and other technical laboratory applications. It is equipped with three measurement ranges for optimized performance and can be calibrated to compatible sensors. The system supports measurement of pressure, force and displacement and is suitable for general laboratory, light industrial and technical environments. The amplifier is based on a resistance full bridge circuit and provides reliable and repeatable measurement performance. Manufactured by Atico Export with quality-focused production and attention to engineering specifications for physiological research, experimental studies and scientific training.

Each Multi Sensor Amplifier Includes :

• Universal Multi Sensor Amplifier
• Multirange power supply including cable
• BNC cable, 2 m length
• Screwdriver for display brightness adjustment
• User manual with operating instructions

Sensor Input :

• 6-pin socket with screw lock

Measurement Range :

• 3 selectable ranges depending on the sensor and desired measurement range

Analog Signal Output :

• BNC socket ±5 V

Dimensions (H × W × D) :

• 5 cm × 16.5 cm × 12 cm

Weight :

• 0.8 kg

Power :

• Wide-range power supply, 110 to 230 V
• Exchangeable plug adapters for EU, USA, China and UK

Operating Temperature :

• 4°C to 40°C (40°F to 104°F)

Storage Temperature :

• 10°C to 70°C (14°F to 158°F)

Operating Humidity :

• 20% to 80% RH, non-condensing

Mode of Operation :

• Continuous

Classification :

• Class II

Pollution Protection :

• IP2X

Installation :

• Category II

• Amplification of sensor signals for pressure, force or displacement measurements
• Three measurement range settings for low, mid and high measurement ranges
• Supports different sensors without changing gain settings where applicable
• Internally preset gain for each measurement range
• Helps prevent unintended gain changes during repetitive measurements
• Zero adjustment over the full measurement range
• Bright measurement display with adjustable contrast
• Analog output ±5 V for range maximum
• Adjustable output voltage for analog signals
• Serial output of measurement values through USB port
• Resistance full bridge measurement circuit
• Suitable for compatible sensors from different suppliers
• Internal gain settings can be adjusted according to the selected sensor
• Designed to maintain consistent measurement accuracy during repetitive measurements